Working smarter, not harder

AMJune21Features - cgtech1
AMJune21Features - cgtech1

When it comes to G-code verification, what are you really checking? NC code simulation and verification software specialists, CGTech reveals how simulating, verifying and optimising the machining process with VERICUT, eliminates the fears of proving out a new NC program.

 

With so much at stake, including the value of the raw or partially completed material, the cutting tools and workholding systems, as well as the structural integrity of the machine tool itself, any NC programming errors will always prove to be costly. Alongside the potential damage to your production capacity there is the prospect of negatively harming the reputation of your business.

VERICUT’s AUTO-DIFF feature compares the CAD design model to the simulation to detect differences, gouges or excess material

While everyone involved with CNC machining understands the importance of checking and verifying the machining process before applying a cutting tool to the raw material, you should consider what are you really checking? More importantly what are you missing?

With multiple lines of code NC, program errors are a common cause of machine crashes and the two main sources of errors are programmer mistakes (we are only human) and errors introduced by the CAM system’s post-processor.

For programmers and machinists the task of manually proving out a process can be a slow – checking line by line, block by block to make sure there are no errors in the program. The machine is held up, production time is occupied and the chances of missing an error that could ultimately result in a very costly crash are extremely high. Especially on complex multi axis machining systems.

An alternative to the manual prove-out is to apply CAM simulation and verification software. Many CAM packages will accurately simulate machine motion and are often used to give feedback about the overall machining process. However, despite advances made within the CAM systems they are still limited when compared to independent third party simulation systems, such as VERICUT.

CAM verification limitations

CAM systems offer varying levels of verification based on CL data, that has been post-processed into machine specific G-Code. In reality, this means the CAM system is simulating something different to what the machine will actually run. This is, of course, one of the main hurdles for CAM simulation and verification.

Cut stock can be measured at any time with X-Caliper in-process measuring

Any simulation that runs on CL data cannot be fully trusted. It is not running the exact same thing that the actual machine is running so there will be differences – in essence it is guessing and projecting what the machine will do as opposed to representing what it will actually do.

In addition, getting true parameters from the machine such as rotary behaviour, shortest distance and so on, is problematic. While machine reference locations such as ‘going home’, where is ‘home’, how does it get there, as well as tool change locations including where does it need to go and how does it get there, are another major limitation of internal CAM verification systems.

The post-processor itself can also introduce errors that could damage the part or the machine. Most CAM verification will use component software for machine simulation, an outsourced generically integrated third party plugin to the software and it is mainly just for material removal and not actually simulating the actual machine motion.

There are some verification systems out there that state “we’re simulating the actual G-Code”. What they are actually doing is posting it and simulating it at the same time and they are projecting what their post is supposed to be doing. So, how can you trust a post-processor driven simulation? Who checks the validity of the post-processor?

The only way forward

Independent G-Code verification software, such as VERICUT, verifies post-processed G-Code instead of the CL data. This is the exact same G-Code that runs within the NC system of the machine, so the software is able to carry out a comprehensive machine simulation based on the same data that will operate the machine.

Unlike CAM verification, the machine features, components, fixtures and stock are identical to the physical process and it offers accurate feature-rich models, cylinders, cones and so on. Multiple setups are supported as cut stock is automatically transferred between set-ups in the proper orientation. All cut history is maintained from the first set-up to the second set-up and so on. This allows the user to quickly and easily identify problems, with a click of the mouse.

Measurement and inspection tools allow the user to check and verify the dimensional accuracy of cut models, something most CAM verification systems cannot do. With in-process measuring, known as X-Caliper in VERICUT, cut stock can be measured at any time, including hole depths, volume removal, model thickness, air distance, diameter/radius, centre of gravity and many more. While the AUTO-DIFF feature compares the CAD design model to the simulation to detect differences, gouges or excess material. This way the user can be certain that the final component precisely reflects the design intent.

VERICUT not only simulates and verifies the accuracy of the machining process, it can also optimises the G-Code by adjusting the feedrates for each cut to make the process safer, faster and more efficient. It drastically reduces cycle times so inadvertently you get faster turnaround, less out-sourcing, reduced tool breakage and longer tool life.

The VERICUT advantage

Simulating, verifying and optimising the machining process with independent G-Code verification software, such as VERICUT, eliminates any fear of a new NC program and reduces setup time. The checking is done during production planning before any real machining starts. So, you never waste valuable machining time and you will be confident that the process will deliver accurate parts with no machine crashes, while adjusting feed rates to optimise machining time and prevent broken cutters.

Given the advantages of using an independent verification system you have to ask ‘is your internal CAM simulation good enough?’

www.cgtech.co.uk

Company

CGTech

Related Articles

Sonaca Montreal boosts capacity with Fives Liné Machines

Sonaca Montreal is a world leader in the manufacture of large aluminium aerostructure components for commercial and business aviation. The company’s core values include customer focus, innovation and operational excellence which it achieves in part through select partnerships.
6 years ago News
Most recent Articles

Carter enjoys success at HAI HELI-EXPO event

Acknowledged as the World’s largest vertical aviation conference and trade show, HAI HELI-EXPO 2024 provided precision bearing specialists Carter Manufacturing a perfect opportunity to exhibit its extensive range of aerospace bearing installation, removal and testing tools, along with PMA bearing options.
22 hours ago News

Login / Sign up